Hammer Coat Hooks | Home Projects
Project: Entryway Hammer Coat Hooks
Phil Kaplan, a successful Portland, Maine, architect, and his wife, Masey, a graphic designer, have built a home together in Falmouth where every detail is both practical and imaginative. Phil designed the house to look like a board-and-batten barn. The couple salvaged spruce and hemlock timbers from a client’s 1760s barn for structural support and for a rustic look. It is one of these hand-hewn beams that the family uses as an ingenious coat rack, which complements what they call their “living barn.”
Process to Make Hammer Coat Hooks
Masey is as creative as her husband. Her lively animal paintings cover the walls of their sons’ bedrooms, and the fourth-floor loft is her fiber arts studio. It was she who came up with the idea to use farm implements as hooks.
After a trip to The Home Depot to pick up tools and rakes, Phil and Masey decided these objects were too new-looking. Masey suggested antique hammers and bought five on eBay for a total of $13.
Phil and a carpenter friend fastened the big 150-pound beam to the wall of the entryway using 8-inch TimberLock screws, predrilled into the studs. Using double-threaded steel lags (a standard hardware store item), the Kaplans screwed the handles into the beam, which was soft enough that getting all the hammers to face the same way was, in Phil’s words, “a cinch.”
Cost to Make Hammer Coat Hooks: $24.25
Seven TimberLock screws at $1.25 each; five lags at 50 cents each; and five hammers for $13.
Please Note: This article was accurate at the time of publication. When planning a trip, please confirm details by directly contacting any company or establishment you intend to visit.